MT-1 is a non-flammable rust Protection that provides UV protection to painted surfaces. Its
rust passed
NAVSEA abrasion tests at with only 1% loss compared to standard requirement.
MT-1 bonding power to 10 times the standard paints available on the market today. Its clear
but color can be
added to make it a complete replacement once in need.
Fully compliant with California VOC requirements. Dries within 90 minutes and cures in 8
hours. With the
bonding properties, outlasts traditional coatings. Its anti abrasion qualities allows it to
withstand the harsh
working environment of the oil and gas exploration reducing the labor required to maintain
equipment, and
reduces the frequency of maintaining equipment.
Long-Term Protection:
Designed to provide durable protection for years, helping maintain the integrity and
appearance of surfaces.
Impact Resistant:
Withstands significant force up to 160 PSI, reducing the risk of cracking or chipping
under stress.
Abrasion Resistant:
Resists wear and tear caused by friction and surface contact, making it ideal for exposed or
high-traffic areas.
VOC Compliant Formula:
Solvent-based formulation that complies with Volatile Organic Compound (VOC) regulations for
safer use.
Fast Drying & Curing:
Dries within approximately 90 minutes and fully cures in about 8 hours for quicker
application turnaround.
UV & Chemical Resistance:
Provides strong resistance against UV exposure and harsh chemicals, ensuring long-lasting
performance.
Strong Bonding Strength:
Forms a powerful bond with the surface, delivering reliable adhesion and durability.
Excellent Gloss Retention:
Maintains a consistent, attractive finish over time without fading or dulling.
USE
INSTRUCTION OF USE
Application Method:
The product can be applied using a brush or a spray gun, depending on the surface and
coverage requirements.
Protect Surrounding Areas:
Cover any parts of the car that should not be sprayed, such as windows, trims, and rubber
components,
to avoid overspray.
Remove Rust:
Ensure the surface is completely free from rust before application for proper adhesion.
Clean & Dry the Surface:
Thoroughly clean the car using a degreaser and car shampoo after rust removal. Ensure the
surface is
completely dry before proceeding.
Apply Two Coats:
Shake the product well before use. Spray the first coat evenly over the surface, applying a
minimum of
350 g of product for adequate coverage. Allow it to dry for approximately 30 minutes,
then apply the
second coat.
WARNINGS
WARNINGS
Inhalation:
Move the affected person to fresh air immediately. If breathing stops, provide artificial
respiration and
administer oxygen if available. Seek medical assistance promptly.
Eye Exposure:
Flush eyes with clean water continuously for at least 15 minutes and seek medical attention.
Ingestion:
Do not induce vomiting. Get medical assistance immediately.
Skin Contact:
Wash skin thoroughly with soap and water. Remove contaminated clothing and wash before
reuse.
Consult a doctor if irritation persists.
DANGER – Fire Hazard:
Flammable liquid and vapor. Keep away from heat, sparks, open flames, and other ignition
sources.
Health Hazards:
May be harmful if swallowed and enters airways. Causes mild skin and eye irritation and may
cause
respiratory irritation. Suspected of damaging fertility or the unborn child and may cause
organ damage.
Handling & Storage Precautions:
Use only in well-ventilated areas. Do not store above 100°F (38°C). Ground containers during
transfer,
store containers upright to prevent leakage, and do not puncture containers.
