MT-1 is a non-flammable rust Protection that provides UV protection to painted surfaces. Its
rust passed
NAVSEA abrasion tests at with only 1% loss compared to standard requirement.
MT-1 bonding power to 10 times the standard paints available on the market today. Its clear
but color can be
added to make it a complete replacement once in need
Fully compliant with California VOC requirements. Dries within 90 minutes and cures in 8
hours. With the
bonding properties, outlasts traditional coatings. Its anti abrasion qualities allows it to
withstand the harsh
working environment of the oil and gas exploration reducing the labor required to maintain
equipment, and
reduces the frequency of maintaining equipment.
Rust Protection:
Effectively prevents rust formation in all environments, offering reliable protection
against corrosion.
Long-Term Protection:
Engineered to provide durable, long-lasting protection for years, helping preserve surface
integrity.
High Impact Resistance:
Withstands heavy impact up to 160 PSI, minimizing the risk of cracking or chipping under
stress.
Abrasion Resistant:
Highly resistant to wear caused by friction or surface contact, ideal for high-traffic and
exposed areas.
VOC Compliant:
Solvent-based formulation that complies with VOC regulations, ensuring safer use and
environmental responsibility.
Fast Drying & Curing:
Touch-dry within 90 minutes and fully cures in just 8 hours for faster application and
turnaround.
UV & Chemical Resistance:
Offers strong resistance against UV exposure and chemical contact, enhancing durability in
harsh conditions.
Strong Bonding Strength:
Creates a powerful bond with surfaces, ensuring long-lasting adhesion and protective
performance.
Gloss Retention:
Maintains a consistent glossy finish over time, keeping surfaces looking clean, polished,
and professional.
USE
INSTRUCTIONS FOR USE
Application Method:
Can be applied using a brush or a spray gun for flexible and convenient application.
Car Preparation:
Proper surface preparation is essential to ensure strong adhesion and long-lasting
performance.
Protect Surrounding Areas:
Cover windows, trims, and any parts that should not be sprayed to prevent overspray.
Remove Rust:
Ensure the surface is completely free from rust before applying the product.
Clean the Surface:
Thoroughly clean the car using a degreaser and car shampoo after rust removal.
Dry the Car:
Make sure the car is completely dry before moving to the application stage.
Apply Two Coats:
Shake well before use. Spray the first coat evenly, applying a minimum of 350g for proper
coverage. Allow it to dry for 30 minutes, then apply the second coat.
WARNINGS
WARNINGS:
Inhalation:
Move the affected person to fresh air immediately. If breathing stops, provide artificial
respiration and administer oxygen if available. Seek medical assistance.
Eye Contact:
Rinse eyes cautiously with clean water for at least 15 minutes. Remove contact lenses if
present and easy to do. Seek medical attention.
Ingestion:
Do not induce vomiting. Seek immediate medical assistance.
Skin Contact:
Wash thoroughly with soap and water. Remove contaminated clothing and wash before reuse.
Consult a doctor if irritation persists.
Flammability Warning:
DANGER: Flammable liquid and vapor. Keep away from heat, sparks, open flames, and ignition
sources.
Health Hazards:
May be harmful if swallowed and enters airways. Causes mild skin and eye irritation and may
cause respiratory irritation.
Long-Term Health Risks:
Suspected of damaging fertility or the unborn child and may cause organ damage with
prolonged exposure.
Handling & Storage Precautions:
Use only in well-ventilated areas. Do not store above 100°F. Ground containers during
transfer, store upright to prevent leaks, and never puncture or reuse containers.
