MT-1 is a non-flammable rust Protection that provides UV protection to painted surfaces. Its
rust passed
NAVSEA abrasion tests at with only 1% loss compared to standard requirement.MT-1 bonding
power to 10 times the standard paints available on the market today. Its clear but color can
be
added to make it a complete replacement once in need
Fully compliant with California VOC requirements. Dries within 90 minutes and cures in 8
hours. With the
bonding properties, outlasts traditional coatings. It's anti-abrasion qualities allows it to
withstand the harsh
working environment of the oil and gas exploration reducing the labor required to maintain
equipment, and
reduces the frequency of maintaining equipment.
Rust Protection:
Helps prevent rust formation in all environments, providing strong protection against
corrosion.
Long-Term Protection:
Designed to deliver lasting protection for years, helping maintain the integrity of treated
surfaces.
High Impact Resistance:
Withstands significant force up to 160 PSI, reducing the risk of cracking or chipping under
stress.
Abrasion Resistant:
Resistant to wear and tear from friction or surface contact, ideal for high-traffic or
exposed areas.
VOC Compliant:
Solvent-based formula compliant with VOC regulations, ensuring safety and environmental
responsibility.
Fast Drying & Curing:
Dries within 90 minutes and fully cures in 8 hours for quicker application and turnaround.
UV & Chemical Resistance:
Provides strong resistance against UV exposure and chemical contact for enhanced durability.
Strong Bonding Strength:
Forms a powerful bond with surfaces, ensuring long-lasting adhesion and protection.
USE
IDEAL FOR PROFESSIONALS & EVERYDAY USE
Application Method:
Can be applied using a brush or a spray gun.
Protect Surrounding Areas:
Cover windows, trims, and other areas that should not be sprayed to prevent overspray.
Remove Rust:
Ensure the surface is completely free from rust before application.
Clean the Surface:
Thoroughly clean the car using a degreaser and car shampoo after rust removal.
Dry the Car:
Ensure the car is completely dry before proceeding to the next step.
Apply Two Coats:
Shake well before use. Spray the first coat evenly, applying a minimum of 350g for proper
coverage. Allow it to dry for 30 minutes, then apply the second coat.
