MT-1 is a non-flammable rust Protection that provides UV protection to painted surfaces. Its
rust passed NAVSEA
abrasion tests at with only 1% loss compared to standard requirement.MT-1 bonding power to
10
times the standard
paints available on the market today. Its clear but color can be added to make it a complete
replacement once in need
Fully compliant with California VOC requirements. Dries within 90 minutes and cures in 8
hours.
With the
bonding properties, outlasts traditional coatings. It's anti-abrasion qualities allows it to
withstand the harsh
working environment of the oil and gas exploration reducing the labor required to maintain
equipment, and
reduces the frequency of maintaining equipment.
Rust & Corrosion Protection:
Helps prevent rust formation in all environments, protecting surfaces against corrosion.
Long-Term Protection:
Designed to deliver lasting protection for years, preserving surface integrity over time.
Impact Resistant:
Withstands significant force up to 160 PSI, resisting cracks and chips under stress.
Abrasion Resistant:
Resists wear and tear from friction and surface contact, ideal for exposed or high-traffic
areas.
VOC Compliant Formula:
Solvent-based formulation that meets Volatile Organic Compound regulations for safer use.
Fast Drying & Curing:
Dries within 90 minutes and fully cures in approximately 8 hours for quicker project
completion.
UV & Chemical Resistance:
Provides strong resistance against UV exposure and harsh chemicals, maintaining durability.
Superior Bonding Strength:
Forms a strong, reliable bond to surfaces, ensuring long-lasting adhesion and performance.
Gloss Retention:
Maintains a consistent, attractive finish over time without dulling or fading.
USE
INSTRUCTION FOR USE
Application Method:
The product can be applied using a brush or a spray gun, depending on the surface and
coverage
requirements.
Protect Surrounding Areas:
Cover all parts of the car that should not be coated, such as windows, trims, rubber seals,
and
adjacent panels,
to prevent overspray.
Remove Rust:
Ensure the surface is completely free from rust before application. Proper rust removal is
essential for
effective adhesion.
Clean & Dry the Surface:
Thoroughly clean the car using a degreaser and car shampoo after rust removal. Allow the
surface
to dry
completely before proceeding.
Apply Two Coats:
Shake the product well before use. Spray the first coat evenly over the surface, applying a
minimum of
350 g of product for adequate coverage. Allow it to dry for approximately 30 minutes,
then
apply the
second coat.
Inhalation (First Aid):
Move the person to fresh air immediately. If breathing stops, give artificial respiration,
administer oxygen if available, and seek medical help.
Eye Contact (First Aid):
Flush eyes with clean water for at least 15 minutes and seek medical assistance.
Ingestion (First Aid):
Do not induce vomiting. Get medical assistance immediately.
Skin Contact (First Aid):
Wash skin thoroughly with soap and water. Remove contaminated clothing and wash before
reuse.
Consult a doctor if irritation persists.
Flammable Hazard: DANGER: Flammable liquid and vapor. Keep away from heat, sparks,
open flames, and other ignition sources.
Health Hazards:
May be harmful if swallowed and enters airways. Causes mild skin and eye irritation,
respiratory irritation, possible organ damage, and suspected reproductive harm.
Safe Handling Precautions:
Use only in well-ventilated areas. Ground containers during transfer.
Store containers upright, do not puncture or reuse, and avoid temperatures above 100°F
(38°C).
