MT-100 is a highly effective rust removal product designed to target and eliminate rust from
metals using a
specialized, advanced approach. The product utilizes a proprietary chelation formulation,
where the molecules
in the solution bind to metal ions, allowing them to dissolve rust from steel and alloys.
This process effectively
breaks down oxidation without causing damage to the underlying metal substrate. It ensures
that the treated
surfaces are left clean, with minimal risk of corrosion or degradation, making MT-100 an
ideal solution for
maintaining and restoring the integrity of metal surfaces.
Non-Destructive Formula:
Non acid-based rust remover designed to preserve the integrity of the metal while removing
only rust.
Metal-Safe Rust Removal:
Effectively removes rust without etching, pitting, or damaging the base metal surface.
Temporary Protective Film:
Leaves behind a thin protective layer after rust removal to help prevent re-oxidation.
Corrosion Guard:
The residual protective film provides short-term corrosion resistance on treated metal
surfaces.
Easy to Use:
Requires minimal physical effort as rust loosens naturally over time without aggressive
scrubbing.
Low Effort Application:
Ideal for maintenance tasks where safe, controlled rust removal is required with reduced
labor.
USE
INSTRUCTION FOR USE
Apply the Solution:
Apply the solution directly to the affected rusted area, ensuring full coverage of the
surface.
Allow Reaction Time:
Let the solution react with the rust. Reaction time may vary between 15 to 30 minutes
depending on the
density and severity of the rust.
Remove Rust:
Remove the loosened rust using a brush, or allow the rust residues to fall away naturally
from the surface.
Final Cleaning:
Wash the treated surface thoroughly using a degreaser to remove any remaining residue and
ensure a clean
finish.
Inhalation (First Aid):
Move the affected person to fresh air immediately. If breathing becomes difficult,
provide oxygen or artificial respiration and seek medical assistance.
Eye Contact (First Aid):
Flush eyes with clean water for at least 15 minutes, lifting eyelids occasionally.
Seek immediate medical attention due to risk of severe eye damage.
Ingestion (First Aid):
Do not induce vomiting. Drink water or milk of magnesia to dilute and seek immediate medical
help.
Skin Contact (First Aid):
Rinse affected skin with water for at least 15 minutes. Remove contaminated clothing
and seek medical attention if irritation or burns occur.
Toxicity Warning:
Toxic if swallowed or inhaled. May be harmful or fatal if ingested, especially if it enters
the airways.
Severe Eye & Skin Irritation:
Causes severe eye damage and skin burns on contact. Avoid direct exposure at all times.
Safety Recommendations:
Use only in well-ventilated areas. Wear protective gloves and safety goggles.
Store the product in its original container when not in use.
